Gotesco Group of Companies .::. Gotesco Marketing, Inc.

PUMPS
FI Frame Mounted End Suction Pumps
	Cast iron casing with integrally cast feet enables pump to be bolted to base for sturdier installation. Allows for back pull without disturbing piping.
	Low-cost, replaceable wear rings protect casing during normal operation.
	Standard ceramic seals promote product flexibility, enabling basic product offering to meet a wide range of application requirements.
	Dry shaft design ensures shaft is never exposed to system fluid, eliminated need for expensive corrosion-resistant shaft, and simplifies sleeve and seal remova/reassembly.
	Rear pullout design allows pump to be serviced without disturbing system piping.
	1/4 NPT pressure tapping on suction and discharge connections.
	Easy-to-replace slip-on shaft sleeve facilitates seal maintenance in the field and lowers long-term maintenance costs.
	Flush seal line tap allows installation of filter to protect seal from particles present in open systems.
	Top centerline discharge design simplifies piping layouts, reduces piping strain, and makes the pump self-venting.
CI Close-Coupled End Suction Pumpss
	Flush seal line taps allow for installation of filter to protect seal from particles presing in open systems.
	1/4 NPT pressure tapping on suction and discharge connections.
	Standard ceramic seals promote product flexibility, enabling bsaic product offering to meet a wide range of application requirements.
	Low-cost, replaceable wear rings protect casing during normal operation.
	Top centerline discharge design simplifies piping layouts, reduces piping strain, and makes pump self-venting.
	Cast-iron casing with intergrally cast feet enables pump to be bolted to a housekeeping pad for strudier installation and still allow back pullout without disturbing the piping.
	Dry shaft design ensures shaft is never exposed to system fluids, eliminates need for expensive corrosion-resistant shaft, and simplifies sleeve and seal removal/reassembly.
	Easy-to-replace slip-on shaft sleeve facilitates seal maintenance in the field and lowers long-term maintenance cost.
	Rear pullout design allows pump to be serviced without disturbing system piping.
KV/KS Vertical In-LIne Pumps
	Designed for optimum performance and ease of installation and maintenance. Ideal for HVAC and industrial applications.
	Flow to 3500 GPM.
	The split coupler design permits changing of the seal without disturbing the motor of the piping.
	The axial load is hydraulically balanced to increase learing life, better pump efficiencies, and lower NPSH requirements.
	The recirculating line flushes seal faces and extends seal life.
	Optimum pump efficiency is achieved by close running impeller to casing clearance.
TA Single Stage Double Suction Horizontal Split Case Pump
	Rugged, heavy-duty casing design allows higher working pressures, provides greater structural integrity, and reduces the risk of distortion.
	Top half of casing is easily removed for easy service of the rotating unit without disturbing piping.
	Impeller is designed to assure minimum NPSH and maximum pump efficiency.
	Mechanical seal option reduces shaft lenght and minimizes shaft deflection, thereby increasing both seal and bearing life.
	Double suction design virtually eliminates axial thrust and reduces bearing loading, promoting maximum bearing life.
	Low-cost, replaceable wear rings protect casing during normal operation.

CARTRIDGE CIRCULATORS
1600 Series In-Line Pumps
	Rugged casing design has maximum operating pressure of 175 psi and a maximum operating temperature of 300⁰F. The 1600 Series is offered in cast iron bronze-fitted construction or all-bronze construction.
	Permanently lubricated long-life bearing cartridge replaces convetional "wick" type bearing/bracket assembly. Single bearing cartridge services the entire product line.
	One-piece enclosed impeller assures long life and higher pump efficiencies.
	Standard mechanical seal assures maximum flexibility. One seal fits all models; several materials available.
	Flexible coupler design dampens system sounds and prevents misalignment forces from affecting pump casing and pump syste.
	Resilient mounted motor ensures quiet, reliable pump operation.
	One bearing cartridge, one seal, and two motor frames fits all pump models, assuring superior parts flexibility.
1900 Series In-Line Pumps
	Close coupled compact design is energy efficient and installs anywhere in the piping layout.
	Self-supporting design allows horizontal or vertical installation.
	Pump and sealed ball bearing motor are maintenance-free.
	REar pullout design and standard motor promote simple, easy service.
	One seal and shaft sleeve fits all models, assuring superior parts flexibility.

FLOW MEASUREMENT
Accu-Flo 1/2" - 4"
	New fixed port venture balancing valve.
	Flow measurement independent of stem and ball position.
	Modified venturi flow measurement section ensures precise and consistent differential pressure readings.
	Positive shut-off ball valve for service work.
	Can be installed in any position.
	Tamper resistant memory stop.
	1/2" - 2" available in sweat and NPT connections.
	2-1/2", 3" and 4" available flanged connections.

PUMP ACCESSORIES
Suction Diffuser
	Provide maximum flow efficiency at the suction side of the pump while reducing space and fitting requirements.
	Integral flow-straightening device eliminates the need for a long entrance pipe.
	Specifically designed to serve the needs of commercial HVAC and industrial applications.
Plus One Multi-Purpose Valve
	Performance features include check valve, balancing valve, and flow metering and measurement.
	Service features include a back-seated stem, easily removed clapper, no lubrication and only one service tool required.

TANKS
Air Separator
	ASM 125# construction.
	Stainless steel removable strainer
	375⁰F maximum operating temperature.
	Optional higher working pressures.
CA, CAX, CX Expansion Tanks
	Rubber diaphragm or bladder separates air and water, resulting in elimation of air versus absorption of air into water
	Optional higher working pressures.
	Heavy Duty butyl rubber bladder removes easily for inspection.
	Full acceptance vessel.
CA Series Expansion Tank
	Heavy duty butyl rubber bladder removes easily for inspection.
	Full acceptance vessel.
CAX Series Expansion Tank
	Heavy duty butyl rubber bladder removes easily for inspection.
	Limited acceptance for small installations and chilled water applications where air and fluid volume requirements are minimal.
	Diaphragm tanks within ASME shells are not used, facilitating inspection of the bladder and eliminating the need for total tank replacement.
CX Series Expansion Tank
	Heavy duty dutyle rubber diaphragm expansion tank allows permanent separation of air and water withing ASME designed and constructed pressure vessel.
	Limited acceptance design for use in small heating installations and most chilled water applications where smaller air volumes and expanced fluid volumes are needed.
Heat Transfer
	Complete line of heat exchanger shell and tube designs, with U or straight tube.
	All heaters constructed in accordance with ASME.
	Size range: 4" through 30".
	Specialized head configurations and tuve material also available.

SYSTEMS
CPV Pressure Booster Systems and HTM Heat Transfer Modules
	Factory pre-packaged module module design reduces installed cost.
	All components factory assembled on heavy quality steel frame.
	Hydrostaticall tested at factory.
	Modules may be modified or customized to application specifications.
	Convenient, responsive single-source service.
	Compact design for easy installation.
	Taco CI or FI pumps with bronze impellers and mechanical (ceramic) seals.
	Individual pump HOA switches and power-on lights.
	A range of optional equipment is available to customize systems for specific applications.
	Available in 50 and 60 HRZ.